Bass Xtreme Series Class D Monoblock Amplifier

MAX Power 10,000 Watts
RMS Power @ 1Ω 3,300W x 1
RMS Power @ 2Ω 2,100Wx1
RMS Power @ 4Ω 1,400Wx1


For those who want the most out of their car audio system, quality sound processing is a must. After slight adjustments, your audio system can sound like it has been tuned by audio professionals. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Reconstruction Processor. Commonly added in-line before subwoofer amplifiers, Bass Processor boosts lower frequency harmonics that have been compressed or removed from today’s music recordings. Dial-in the exact sound you want by tuning the frequency to boost, then increase the bandwidth range from that frequency to boost the harmonics around it. Unlock and restore the bass from any system with Bass Xtreme Amplifiers.



SWEEP selects the frequency boosted by the equalizer. This is the “center frequency”, which can be as low as 27Hz, or as high as 63Hz. Choosing this frequency depends on your taste in music.

WIDTH increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.

OUTPUT VOLTAGE is the amount of boost level. Your instincts might be to choose 10V because why not, but hold on a second… more isn’t necessarily better. In this case, more can be dangerous, potentially damaging your subwoofers.

MAX BASS INDICATOR lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been reached. Remember, more isn’t necessarily better…

DASH MOUNT CONTROL included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The output level of the Bass Equalizer can be controlled, as well as the amplifiers gain level.


MAX Power 10,000 Watts
RMS Power @ 1Ω 3,300W x 1
RMS Power @ 2Ω 2,100W x 1
RMS Power @ 4Ω 1,400W x 1
Dimensions (8.2″Wx2.2″ H) 19.75″L


Digital Bass Reconstruction Processor Built-in

Adds Impact to Music w/ Insufficient Sub Bass

27Hz-63Hz Variable Center/Sweep Frequency

Variable Q/Width to Broaden or Narrow the Bandwidth

LED MAX BASS Indicators Warning of Extreme Levels

1-ohm Minimum Impedance Monoblock Operation

Bridge 2 Monoblocks Together for Double Power!

MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

Military Grade SMT PCB Maintains Dynamic Performance

Direct Short, Thermal, & Overload Circuits Protect Amplifier

200mV-6V High Level or Low-Level RCA Input & Output

Dash Mount Gain Control Module Included


Owner’s Manual (PDF)