BXA1-7500D Amplifier

Built-in Digital Bass Reconstruction Amplifier
Max Power 7,500 Watts
RMS Power @ 1Ω 2,500W x 1
RMS Power @ 2Ω 1,500W x 1
RMS Power @ 4Ω 1,000W x 1

Category: Tags: , ,

Description

For those who want the most out of their car audio system, quality sound processing is necessary. Bass Xtreme amplifiers offer similar sound processing options by including the functions of a Bass Equalizer. Commonly added in-line before subwoofer amplifiers, Bass Equalizers boost lower frequency harmonics that have been compressed or removed from today’s music recordings. Dial in the exact sound you want by tuning the frequency to expand, then increase the bandwidth range from that frequency to boost the harmonics around it. After some slight adjustments, your system can sound like audio professionals have tuned it. Unlock the best bass from any system with Bass Xtreme amplifiers.

Works great for music or factory radios that forgot we enjoy bass response in our systems! No Problem! EDM, Banda, Rock, Jazz…

Features

1-OHM MINIMUM IMPEDANCE STABILITY

An amplifier’s impedance stability is its ability to continuously power speaker(s) of no less than the given impedance per channel, without the risk of damage. Subwoofers are available in various voice coil configurations and impedances, so be sure yours will be no less than 1-ohm.

ACTIVE 12DB/OCTAVE CROSSOVERS & PHASE SHIFT

Active crossovers built into an amplifier are the most efficient type of crossovers to use in-car audio systems. Active crossovers protect speakers from damage by harmful frequencies and preserve optimum performance.

LOW-LEVEL RCA INPUT & PRE-AMP OUTPUT

Connect the low-level (pre-amp) audio output of the car stereo to the amplifier, using good quality twisted pair RCA interconnect cables. The amplifiers pre-amp output daisy-chains the audio signal to multiple amplifiers of complex audio systems.

SWEEP Control

selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.

WIDTH Control

increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.

MAX BASS INDICATOR

lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been reached. Remember, more isn’t necessarily better…

DASH MOUNT CONTROL

included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The output level of the Bass Equalizer can be controlled, as well as the amp.

Specifications

SPECIFICATIONS BXA1-7500D
Max Power 7,500 Watts
RMS Power @ 4Ω 1,00W x 1
RMS Power @ 2Ω 1,500W x 1
RMS Power @ 1Ω 2,500W x 1
Remote Gain Control Included
Low Pass Filter 40Hz-150Hz
High Pass Filter N/A
Bass Boost 0-12dB
Bass Boost Frequency 45Hz
Subsonic Filter 10Hz-50Hz
Frequency Response 15-500Hz
S/N 105dB
Input Sensitivity 200Mv-6V
THD <0.3%
Operation Voltage 9V-16V DC
Fuse Rating 100A x 2
Dimensions
(8.25″W x 2.75″H)
15.75″ L

Support

BXA Amplifier Owner’s Manual (PDF)