R3.10

Reference R3 10″ High Roll Foam Surround

4-Layer Dual 2-Ohm Subwoofer

Max Power 1,400 Watts
RMS Power 700 Watts
Mounting Depth 6.00″
Voice Coil Configuration 2.5″ DVC 2Ω

Description

Sometimes a woofer comes along that changes the game. The R3 is just that; it has a high roll surround for an extended excursion. With a 4-Layer voice coil and a gigantic motor structure, it can handle some serious authority. This woofer can get down and hang with just about any other woofer out there with incomparable sound quality. Whether an SPL competitor or an SQ competitor, this is a woofer that can do it all.

Reference R3 Woofers use fiberglass stranding woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with sonic qualities of pulp paper backing process itself worth of any system.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Subwoofer Wiring Diagram

Specifications

Specifications  R3.10
Max Power 1,400 Watts
RMS Power (watts) 700
Efficiency (1w/1m) 82.1
Voice Coil Configuration 2.5″ DVC 2Ω
Mounting Depth 6.00″
Optimum Sealed ft3 1
Optimum Ported ft3 1.5

 

Thiele/Small Parameters

Imp. (Ohm) Dual 2
Re 2.1802
Fs (Hz) 34.58
Qes 1.253
Qms 7.3411
Qts 1.0703
Le (mH) 1.0274
Diam 10
Vas (L) 33.3893
BL 9.3526
Mms (g) 231.3417
Sen (db) 82.17
RMS 700
Mounting D 6″

 

Recommended Enclosures
Sealed Opt 1.0 ft²
Ported Opt 1.5 ft²
Port WxL 4″x6″
F3 (Hz) 32

Support

Owners Manual [.PDF]

 

Note: If you are wiring this DVC sub for lower impedance,

make sure that your amp is compatible. Subwoofer Wiring Diagram