X5.12

Limited Edition Team Subwoofer

Dual 1-Ohm 12″ Configuration

Max Power 7,500 Watts
RMS Power 3,500 Watts
Net Weight 68 lbs
Voice Coil Configuration 4″ DVC 1Ω

Description

Soundstream overheard, and we listened. “Design a subwoofer for SPL!” The Limited Production X5 Series Subwoofer was designed for bass heads by bass heads. These monstrous subwoofers have exceptional specifications; 4” Dual 1Ω Voice Coils, numerous large vents for fast heat dissipation, beefy triple-stacked magnet assembly, and 8ga Duplex direct wire hookups.

X5.12 and X5.15 were crafted to help Team Soundstream move in the direction past standard production subwoofers. These pair nicely with the newest Soundstream amplifier arsenal, the “Tarantula XP” High Output series. Both subwoofers can handle up to 3,500w RMS… which is sure to set off some alarms!

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. ½ Ohm is wild…

Specifications

Specifications  X5.12
Max Power 7,500 Watts
RMS Power 3,500 Watts
Efficiency (1w/1m) 87.8
Voice Coil Configuration 4″ DVC 1Ω
Mounting Depth 8.5″
Optimum Sealed ft3 1.50″
Optimum Ported ft3 3.50″

 

Thiele/Small Parameters

Imp. (Ohm) Dual 1
Re 1
Fs (Hz) 43.08
Qes .556
Qms 6.983
Qts .515
Le (mH) 1.0274
Diam 12
Vas (L) 11.855
BL 18.04
Mms (g) 328.9
Sen (db) 87.8
RMS 3500
Mounting Depth 8.5″

 

Recommended Enclosures
Sealed Opt 2.00 ft
Ported Opt 4.50 ft
Port WxL 3″ x 11.5L”
F3 (Hz) 28

Wiring

Single Woofer, Series Wiring

Connecting the two voice coils of the sub in series (+ to -) will score the following impedance:

Dual 1Ω Subwoofer: 2 Ohm Final

Dual Woofers, Series Wiring

Connecting the two voice coils of each sub in series (+ to -)and the sub themselves in parallel will score the following impedances:

(2) Dual 1Ω Subwoofers: 1 Ohm Final

Support

Owners Manual [PDF]