Description
For the Rubicon Nano series amplifiers, we’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform and present to you Rubicon Nano. At first glance, you’ll notice several key improvements; Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis, for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. What you might not notice are embellishments to the circuit board, including increased power supply & output stage components, & Monoblock bridging capability.
Using an Original or Factory Radio? No Problem, this amplifier is equipped with an Automatic Hi-Level Signal Sensing Turn-On. No need to run a remote wire turn on, this amplifier will detect the signal and turn on and off automatically. (Hi-Level Input only)
- High-Efficiency Class D Full-Range Amplifiers
- Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- 1-ohm Minimum Impedance Monoblock Operation
- Monoblock Bridging Capability for Double Amplifier Application
- MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
- Military Grade SMT PCB Maintains Dynamic Performance
- Direct Short, Thermal, & Overload Circuits Protect Amplifier
- 200mV-6V Low-Level RCA or High-Level Signal Input
- Automatic Turn-On Hi-Level Signal Sensing
- Quick Disconnect High-Level Wire Harness Included
- Easy DIY Install Single-Sided Terminals & Controls
- 4g Power Input Terminals & 12g Speaker Output Terminals
- Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
- 12dB Bass Boost Increases Low Octave Harmonics
- Dash Mount Gain Control Module Included
Specifications
Rubicon Nano | RN1.3000D |
---|---|
Max Power | 3,000w |
RMS Power 4Ω | 600 x 1 |
RMS Power 2Ω | 900 x 1 |
RMS Power 1Ω | 1,500 x 1 |
Remote Gain Control | Included |
Dimensions: (6.50” w x 1.50”h) | 10.25” |