RN1.5000D

Rubicon Nano Class D Monoblock

Strap Bridge-Mode Ready (Master/Slave)

Max Power 5,000 Watts
RMS Power 4Ω 1,000W x 1
RMS Power 2Ω 1,500W x 1
RMS Power 1Ω 2,500W x 1
Category:

Description

We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice several key improvements; Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability.

Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn on and off the amplifier. (Hi-Level Input only)

Specifications

SPECIFICATIONS RN1.5000D
Max Power 5,000 Watts
RMS Power @ 4Ω 1,000W x 1
RMS Power @ 2Ω 1,500W x 1
RMS Power @ 1Ω 2,500W x 1
Remote Gain Control Included
Low Pass Filter 50Hz-500Hz
High Pass Filter N/A
Bass Boost 0-12dB
Bass Boost Frequency 45Hz
Subsonic Filter 20Hz-50Hz
Frequency Response 20Hz-50Hz
S/N 104dB
Input Sensitivity 200Mv-6V
THD <0.1%
Operation Voltage 9V-16V DC
Fuse Rating 30A x 6
Dimensions
(8.25″W x 2.75″H)
17.75″ L

Support

Owner’s Manual [PDF]