PN2.350D Amplifier

Picasso Nano Series 2Ch Amplifier
Max Power700 Watts
RMS Power 4Ω115W x 2
RMS Power 2Ω175W x 2
RMS Bridged 4Ω350W x 1

Description

When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music amplifying equipment can have such an amazing output. What’s more, is in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears. 

You can install the amplifier under the front seat or the back seat, and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, is the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry.

Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn on and off the amplifier. (Hi-Level Input only)

Specifications

SPECIFICATIONSPN2.350D
Max Power700 Watts
RMS Power @ 4Ω115W x 2
RMS Power @ 2Ω175W x 2
RMS Bridged @ 4Ω350W x 1
Remote Gain ControlIncluded
Low Pass Filter35Hz-250Hz
High Pass Filter35Hz-250Hz
Bass Boost0-12dB
Bass Boost Frequency45Hz
Subsonic Filter10Hz-50Hz
Frequency Response10-300Hz
S/N104dB
Input Sensitivity200Mv-6V
THD<0.1%
Operation Voltage9V-16V DC
Fuse RatingN/A
Dimensions
(8.25″W x 2.75″H)
5.5″ L

Support

Picasso Nano Owner’s Manual [PDF]